Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/inderscience-publishers/a-novel-approach-to-fixture-design-based-on-locating-correctness-EMS62fbj5r
References (13)
-
H. Asada, André By (1985)
Kinematic analysis of workpart fixturing for flexible assembly with automatically reconfigurable fixturesIEEE J. Robotics Autom., 1
-
Y. Chou, V. Chandru, M. Barash (1989)
A Mathematical Approach to Automatic Configuration of Machining Fixtures: Analysis and SynthesisJournal of Engineering for Industry, 111
-
Michael Wang (2000)
An optimum design for 3-D fixture synthesis in a point set domainIEEE Trans. Robotics Autom., 16
-
(1985)
Kinematic analysis of workpiece fixturing for flexible assembly with automatically reconfigurable fixtures ’ , IEEE Journal of Robotics and Automation -
H. Song, Y. Rong (2005)
Locating completeness evaluation and revision in fixture planRobotics and Computer-integrated Manufacturing, 21
-
M. Hong, S. Payandeh, W. Gruver (1996)
Modeling and analysis of flexible fixturing systems for agile manufacturing1996 IEEE International Conference on Systems, Man and Cybernetics. Information Intelligence and Systems (Cat. No.96CH35929), 2
-
(1992)
An automatic workholding verification system -
G. Qin, Weihong Zhang, M. Wan (2006)
A mathematical approach to analysis and optimal design of a fixture locating schemeThe International Journal of Advanced Manufacturing Technology, 29
-
(1999)
Computer Aided Fixture -
Y. Kang, Y. Rong, J. Yang (2003)
Computer-Aided Fixture Design Verification. Part 1. The Framework and ModellingThe International Journal of Advanced Manufacturing Technology, 21
-
Y. Kang, Y. Rong, J. Yang, W. Ma (2002)
Computer‐aided fixture design verificationAssembly Automation, 22
-
K. Rong, S. Zhu (1999)
Computer-Aided Fixture Design -
Wayne Cai, S. Hu, Jingxia Yuan (1997)
A Variational Method of Robust Fixture Configuration Design for 3-D WorkpiecesJournal of Manufacturing Science and Engineering-transactions of The Asme, 119
- Publisher
- Inderscience Publishers
- Copyright
- Copyright © Inderscience Enterprises Ltd. All rights reserved
- ISSN
- 1750-0591
- eISSN
- 1750-0605
- DOI
- 10.1504/IJMR.2010.035812
- Publisher site
- See Article on Publisher Site
Abstract
In a machining process, since the geometric accuracy of a manufacturing workpiece mainly relies on the relative position of workpiece to the machining tool, fixtures are needed to locate the workpiece. The clear concept of locating correctness is presented based on Venn diagram and a general algorithm is proposed to determine the locator number and layout. On one hand, the theoretical and practical constrained DOFs are formulated as a function of the machining requirement and the locating scheme, respectively. On the other hand, some criteria are concluded to analyse the locating correctness and modify the locating scheme with locating incorrectness.
Journal
International Journal of Manufacturing Research – Inderscience Publishers
Published: Jan 1, 2010