Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Optimal cement space for resin luting cements.

Optimal cement space for resin luting cements. Stainless steel dies, simulating 0 to 80 microns of die spacing, were seated into a machined brass crown with Phosphacap, Panavia EX, and C & B Metabond. The seating discrepancy after 60 seconds was measured to determine the optimal cement space for best seating for each agent. The most complete seating for crowns luted with zinc phosphate cement was observed when at least 40 microns of cement space was provided. C & B Metabond and Panavia required 30 microns of die spacing. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png The International journal of prosthodontics Pubmed

Optimal cement space for resin luting cements.

The International journal of prosthodontics , Volume 7 (3): 7 – Nov 3, 1994

Optimal cement space for resin luting cements.


Abstract

Stainless steel dies, simulating 0 to 80 microns of die spacing, were seated into a machined brass crown with Phosphacap, Panavia EX, and C & B Metabond. The seating discrepancy after 60 seconds was measured to determine the optimal cement space for best seating for each agent. The most complete seating for crowns luted with zinc phosphate cement was observed when at least 40 microns of cement space was provided. C & B Metabond and Panavia required 30 microns of die spacing.

Loading next page...
 
/lp/pubmed/optimal-cement-space-for-resin-luting-cements-XTU5UC0rz1

References

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

ISSN
0893-2174
pmid
7916885

Abstract

Stainless steel dies, simulating 0 to 80 microns of die spacing, were seated into a machined brass crown with Phosphacap, Panavia EX, and C & B Metabond. The seating discrepancy after 60 seconds was measured to determine the optimal cement space for best seating for each agent. The most complete seating for crowns luted with zinc phosphate cement was observed when at least 40 microns of cement space was provided. C & B Metabond and Panavia required 30 microns of die spacing.

Journal

The International journal of prosthodonticsPubmed

Published: Nov 3, 1994

There are no references for this article.