Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

An Introduction to Modelling of Power System ComponentsErratum to: Synchronous Generator

An Introduction to Modelling of Power System Components: Erratum to: Synchronous Generator S Krishna Erratum to: Chapter 1 in: S Krishna, An Introduction to Modelling of Power System Components, SpringerBriefs in Electrical and Computer Engineering, DOI 10.1007/978-81-322-1847-0_1 On page 20, “If the total number of turns in a winding is N, the number of turns per field pole pair is 2N/p . The inductance of the part of a winding with 2N/p turns is equal to f f 2/p times the expression derived above, if θ is the electrical angle. The total inductance is obtained by multiplying this expression by p /2. Hence, the induc- tance expressions derived above are valid even if p > 2.” Should be replaced by “Let N , N , N , N , and N be the total number of turns of the equivalent a f 1d 1q 2q sinusoidally distributed windings a, f,1d,1q, and 2q, respectively. The number of turns, of any equivalent sinusoidally distributed winding, per field pole pair is equal The online version of the original chapter can be found under DOI 10.1007/978-81-322-1847-0_1 S Krishna (&) Department of Electrical Engineering, Indian Institute of Technology Madras, Chennai, Tamil Nadu, India e-mail: krishnas@iitm.ac.in S Krishna, An Introduction to Modelling of Power System Components, E1 http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png

An Introduction to Modelling of Power System ComponentsErratum to: Synchronous Generator

Download PDF
2 pages

Loading next page...
 
/lp/springer-journals/an-introduction-to-modelling-of-power-system-components-erratum-to-500PxWXJ5b
Publisher
Springer India
Copyright
© The Author(s) 2014
ISBN
978-81-322-1846-3
Pages
E1 –E2
DOI
10.1007/978-81-322-1847-0_5
Publisher site
See Chapter on Publisher Site

Abstract

S Krishna Erratum to: Chapter 1 in: S Krishna, An Introduction to Modelling of Power System Components, SpringerBriefs in Electrical and Computer Engineering, DOI 10.1007/978-81-322-1847-0_1 On page 20, “If the total number of turns in a winding is N, the number of turns per field pole pair is 2N/p . The inductance of the part of a winding with 2N/p turns is equal to f f 2/p times the expression derived above, if θ is the electrical angle. The total inductance is obtained by multiplying this expression by p /2. Hence, the induc- tance expressions derived above are valid even if p > 2.” Should be replaced by “Let N , N , N , N , and N be the total number of turns of the equivalent a f 1d 1q 2q sinusoidally distributed windings a, f,1d,1q, and 2q, respectively. The number of turns, of any equivalent sinusoidally distributed winding, per field pole pair is equal The online version of the original chapter can be found under DOI 10.1007/978-81-322-1847-0_1 S Krishna (&) Department of Electrical Engineering, Indian Institute of Technology Madras, Chennai, Tamil Nadu, India e-mail: krishnas@iitm.ac.in S Krishna, An Introduction to Modelling of Power System Components, E1

Published: Feb 3, 2015

Keywords: Synchronous Generator; Erratum; Electrical Angle; Power System Components; Respective Wind

There are no references for this article.