Access the full text.
Sign up today, get DeepDyve free for 14 days.
G. Ciocan, M. Iliescu, T. Vu, B. Nennemann, F. Avellan (2007)
Experimental Study and Numerical Simulation of the Flindt Draft Tube Rotating VortexJournal of Fluids Engineering-transactions of The Asme, 129
(2012)
CFD Modeling for Performance Prediction of a Hydro Turbine Draft Tube: the Effect of Inlet Boundary Conditions for Two-Equation Turbulence Models,” in Proc
Hydro Turbines, Storage Pumps and Pump-Turbines-Model Acceptance Tests
肖业祥, 王正伟, 张瑾, 罗永要 (2014)
Numerical predictions of pressure pulses in a Francis pump turbine with misaligned guide vanes
A. Minakov, D. Platonov, A. Dekterev, A. Sentyabov, A. Zakharov (2015)
The analysis of unsteady flow structure and low frequency pressure pulsations in the high-head Francis turbinesInternational Journal of Heat and Fluid Flow, 53
P. Jonsson, B. Mulu, M. Cervantes (2012)
Experimental investigation of a Kaplan draft tube – Part II: Off-design conditionsApplied Energy, 94
O. Kirschner, A. Ruprecht (2007)
Velocity Measurement with PIV in a Straight Cone Draft Tube
S. Skripkin, M. Tsoy, S. Shtork, K. Hanjalic (2016)
Comparative analysis of twin vortex ropes in laboratory models of two hydro-turbine draft-tubesJournal of Hydraulic Research, 54
S. Tridon, S. Barre, G. Ciocan, L. Tomas (2010)
Experimental analysis of the swirling flow in a Francis turbine draft tube: Focus on radial velocity component determinationEuropean Journal of Mechanics B-fluids, 29
M. Iliescu, G. Ciocan, F. Avellan (2008)
Analysis of the Cavitating Draft Tube Vortex in a Francis Turbine Using Particle Image Velocimetry Measurements in Two-Phase FlowJournal of Fluids Engineering-transactions of The Asme, 130
M. Cervantes, C. Trivedi, O. Dahlhaug, T. Nielsen (2015)
Francis-99 Workshop 1: steady operation of Francis turbinesJournal of Physics: Conference Series, 579
B. Mulu, P. Jonsson, M. Cervantes (2012)
Experimental investigation of a Kaplan draft tube – Part I: Best efficiency pointApplied Energy, 93
M. Cervantes, C.H. Trivedi, O.G. Dahlhaug, T. Nielsen (2015)
Francis-99 Workshop 1: Steady Operation of Francis TurbinesJ. Phys. Conf. Ser., 579
(1966)
Modeling of Thermal Power Equipment
Chang-Kun Chen, C. Nicolet, K. Yonezawa, M. Farhat, F. Avellan, K. Miyazawa, Y. Tsujimoto (2010)
Experimental Study and Numerical Simulation of Cavity Oscillation in a Diffuser with Swirling FlowInternational Journal of Fluid Machinery and Systems, 3
H. Keck, M. Sick (2008)
Thirty years of numerical flow simulation in hydraulic turbomachinesActa Mechanica, 201
Z. Zuo, Shuhong Liu, De-min Liu, D. Qin, Yulin Wu (2015)
Numerical analyses of pressure fluctuations induced by interblade vortices in a model Francis turbineJournal of Hydrodynamics, 27
R. Stephenson (1962)
A and VBritish Journal of Ophthalmology, 46
Helmut Keck (2008)
211Acta mechanica, 201
A. Favrel, A. Müller, C. Landry, K. Yamamoto, F. Avellan (2015)
Study of the vortex-induced pressure excitation source in a Francis turbine draft tube by particle image velocimetryExperiments in Fluids, 56
Timo Krappel, H. Kuhlmann, O. Kirschner, A. Ruprecht, S. Riedelbauch (2015)
Validation of an IDDES-type turbulence model and application to a Francis pump turbine flow simulation in comparison with experimental resultsInternational Journal of Heat and Fluid Flow, 55
(2014)
Physical Governing Mechanisms Self-Excited Pressure Oscillations in Francis Turbines (Ecole Polytech
(2009)
2D LDV Measurements of Swirling Flow in a Simplified Draft Tube,” in Proc
R. Susan-Resiga, G. Ciocan, I. Anton, F. Avellan (2006)
Analysis of the Swirling Flow Downstream a Francis Turbine RunnerJournal of Fluids Engineering-transactions of The Asme, 128
J. Arpe, F. Avellan (2002)
Pressure Wall Measurements in the whole Draft Tube : Steady and Unsteady Analysis, 1
M.S. Iliescu (2008)
21105Journal of Fluids Engineering, 130
(2006)
Applying of Specialized Optical Laser and Video Systems for Study of Three-Dimensional Flows in Hydro Turbines
G. Ciocan, M. Iliescu (2012)
PIV Measurements Applied to Hydraulic Machinery: Cavitating and Cavitation-Free Flows
Investigation of hydro-turbine runner flow on a full-scale test rig consisting of a spiral casing, a stator, guide vanes, and a runner is difficult due to high cost and labor intensity. Therefore, an approach to modeling the inlet velocity profile of a hydro turbine draft tube is proposed that significantly reduces the cost of testing. In this approach, the draft tube inlet flow is modeled using a special swirl apparatus which is a combination of two swirlers: fixed and rotating. The paper presents the results of analytical calculation of the vane shape that provides a given velocity distribution corresponding to the optimal operation of the hydro turbine.
Journal of Applied Mechanics and Technical Physics – Springer Journals
Published: Feb 1, 2023
Keywords: modeling; design; hydro turbine
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.