Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Microstructure Development and Property Improvement in Mill Products Produced from Ingot Metallurgy and Powder Metallurgy Ni-Based Superalloys of the Same Chemical Composition

Microstructure Development and Property Improvement in Mill Products Produced from Ingot... Despite projected inroads from competing materials Ni-based superalloys remain the material of choice in the hot sections of advanced gas turbine engines. In this paper microstructural development and improvement of mechanical properties in mill products produced by ingot metallurgy (IM) and powder metallurgy (PM) techniques are discussed. Particular attention is given to approaches to improvement in ingot ductility. Thermomechanical treatment schemes used during forging of a complex-alloyed Ni-based superalloy are recommended. It is demonstrated that the PM technique used for production of this complex-alloyed superalloy is a promising approach. On the basis of the studies carried out the salient features of the structure of material produced both by both IM and PM techniques have been defined. The mechanical properties of two versions of an advanced Ni-base superalloy produced by IM and PM techniques are discussed. The best combination of mechanical properties are exhibited by a PM material with a necklace structure; and this latter structure is superior to a fine grained structure for IM product also. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Advanced Performance Materials Springer Journals

Microstructure Development and Property Improvement in Mill Products Produced from Ingot Metallurgy and Powder Metallurgy Ni-Based Superalloys of the Same Chemical Composition

Download PDF
13 pages

Loading next page...
 
/lp/springer-journals/microstructure-development-and-property-improvement-in-mill-products-6RWr7EBxB0
Publisher
Springer Journals
Copyright
Copyright © 1997 by Kluwer Academic Publishers
Subject
Engineering; Automotive Engineering; Characterization and Evaluation of Materials; Classical Mechanics; Metallic Materials
ISSN
0929-1881
eISSN
1572-8765
DOI
10.1023/A:1008624300205
Publisher site
See Article on Publisher Site

Abstract

Despite projected inroads from competing materials Ni-based superalloys remain the material of choice in the hot sections of advanced gas turbine engines. In this paper microstructural development and improvement of mechanical properties in mill products produced by ingot metallurgy (IM) and powder metallurgy (PM) techniques are discussed. Particular attention is given to approaches to improvement in ingot ductility. Thermomechanical treatment schemes used during forging of a complex-alloyed Ni-based superalloy are recommended. It is demonstrated that the PM technique used for production of this complex-alloyed superalloy is a promising approach. On the basis of the studies carried out the salient features of the structure of material produced both by both IM and PM techniques have been defined. The mechanical properties of two versions of an advanced Ni-base superalloy produced by IM and PM techniques are discussed. The best combination of mechanical properties are exhibited by a PM material with a necklace structure; and this latter structure is superior to a fine grained structure for IM product also.

Journal

Advanced Performance Materials – Springer Journals

Published: Sep 28, 2004

References

  • Residual stresses
    Birger, I.A.