Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Optimization of Manufacturing ProcessesPrediction and Optimization of Tensile Strength in FDM Based 3D Printing Using ANFIS

Optimization of Manufacturing Processes: Prediction and Optimization of Tensile Strength in FDM... [Fused Deposition Modeling (FDM)Fused deposition modeling is universally used 3D printing3D printing technology, to manufacture prototypes as well functional parts due to its capability to create components having any geometric complexity in shorter duration, without any specific tooling requirement or human intervention. FDM fabricated parts have found many promising application in various industries such as aerospace, automobile, medical, customizable products etc. However, the application of FDM parts has been restricted by poor mechanical performance. The mechanical properties of the FDM fabricated part are largely affected by selection of various build parameters. Optimal selection of various build parameters can help to achieve better mechanical strength. The Adaptive network-based a fuzzy Interference System (ANFIS)Adaptive Neuro-Fuzzy Interface System (ANFIS) is uses both neural networks and fuzzyFuzzy logic to generate a mapping between inputs and response. In ANFIS, the parameters for fuzzy system has been identifying using a neural network. Hybrid learning rule can be used for creating a fuzzy set of IF-THEN rules with the appropriate membership functions and generating previously defined Input/Outputs pairs. Initially, a detailed experimental investigation was conducted to understand the impact of different build parameters on the tensile strength of printed PLA. Using experimental data, an optimized model of ANFIS was developed to anticipate the tensile strength of printed parts.] http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png

Optimization of Manufacturing ProcessesPrediction and Optimization of Tensile Strength in FDM Based 3D Printing Using ANFIS

Part of the Springer Series in Advanced Manufacturing Book Series
Editors: Gupta, Kapil; Gupta, Munish Kumar
Rajpurohit, Shilpesh R.; Dave, Harshit K.
Optimization of Manufacturing Processes — Jun 26, 2019
Download PDF
17 pages

Loading next page...
 
/lp/springer-journals/optimization-of-manufacturing-processes-prediction-and-optimization-of-pyAMo7KXLZ
Publisher
Springer International Publishing
Copyright
© Springer Nature Switzerland AG 2020
ISBN
978-3-030-19637-0
Pages
111 –128
DOI
10.1007/978-3-030-19638-7_5
Publisher site
See Chapter on Publisher Site

Abstract

[Fused Deposition Modeling (FDM)Fused deposition modeling is universally used 3D printing3D printing technology, to manufacture prototypes as well functional parts due to its capability to create components having any geometric complexity in shorter duration, without any specific tooling requirement or human intervention. FDM fabricated parts have found many promising application in various industries such as aerospace, automobile, medical, customizable products etc. However, the application of FDM parts has been restricted by poor mechanical performance. The mechanical properties of the FDM fabricated part are largely affected by selection of various build parameters. Optimal selection of various build parameters can help to achieve better mechanical strength. The Adaptive network-based a fuzzy Interference System (ANFIS)Adaptive Neuro-Fuzzy Interface System (ANFIS) is uses both neural networks and fuzzyFuzzy logic to generate a mapping between inputs and response. In ANFIS, the parameters for fuzzy system has been identifying using a neural network. Hybrid learning rule can be used for creating a fuzzy set of IF-THEN rules with the appropriate membership functions and generating previously defined Input/Outputs pairs. Initially, a detailed experimental investigation was conducted to understand the impact of different build parameters on the tensile strength of printed PLA. Using experimental data, an optimized model of ANFIS was developed to anticipate the tensile strength of printed parts.]

Published: Jun 26, 2019

Keywords: Fused deposition modeling; Tensile strength; ANFIS; Fuzzy logic; Membership function

There are no references for this article.