Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/springer-journals/surface-bubble-modulated-liquid-chromatography-an-experimental-yTf075B1Hk
- Publisher
- Springer Journals
- Copyright
- Copyright © The Author(s), under exclusive licence to The Japan Society for Analytical Chemistry 2023. Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
- ISSN
- 0910-6340
- eISSN
- 1348-2246
- DOI
- 10.1007/s44211-023-00291-y
- Publisher site
- See Article on Publisher Site
Abstract
Molecular level understanding of the chemistry at the aqueous/hydrophobe interface is crucial to separation processes in aqueous media, such as reversed-phase liquid chromatography (RPLC) and solid-phase extraction (SPE). Despite significant advances in our knowledge of the solute retention mechanism in these reversed-phase systems, direct observation of the behavior of molecules and ions at the interface in reversed-phase systems still remains a major challenge and experimental probing techniques that provide the spatial information of the distribution of molecules and ions are required. This review addresses surface-bubble-modulated liquid chromatography (SBMLC), which has a stationary gas phase in a column packed with hydrophobic porous materials and enables one to observe the molecular distribution in the heterogeneous reversed-phase systems consisting of the bulk liquid phase, the interfacial liquid layer, and the hydrophobic materials. The distribution coefficients of organic compounds referring to their accumulations onto the interface of alkyl- and phenyl-hexyl-bonded silica particles exposed to water or acetonitrile–water and into the bonded layers from the bulk liquid phase are determined by SBMLC. The experimental data obtained by SBMLC show that the water/hydrophobe interface exhibits an accumulation selectivity for organic compounds, which is quite different from that of the interior of the bonded chain layer, and the overall separation selectivity of the reversed-phase systems is determined by the relative sizes of the aqueous/hydrophobe interface and the hydrophobe. The solvent composition and the thickness of the interfacial liquid layer formed on octadecyl-bonded (C18) silica surfaces are also estimated from the bulk liquid phase volume determined by the ion partition method employing small inorganic ions as probes. It is clarified that various hydrophilic organic compounds as well as inorganic ions recognize the interfacial liquid layer formed on the C18-bonded silica surfaces as being different from the bulk liquid phase. The behavior of some solute compounds exhibiting substantially weak retention in RPLC or the so-called negative adsorption, such as urea, sugars, and inorganic ions, can rationally be interpreted with a partition between the bulk liquid phase and the interfacial liquid layer. The spatial distribution of solute molecules and the structural properties of the solvent layer on the C18-bonded layer determined by the liquid chromatographic methods are discussed in comparison to the results obtained by other research groups using molecular simulation methods.Graphical abstract[graphic not available: see fulltext]
Journal
Analytical Sciences – Springer Journals
Published: Jun 1, 2023
Keywords: Reversed-phase systems; Retention mechanism; Surface-bubble-modulated liquid chromatography; Interfacial liquid layer; Mobile phase volume; Ion partition method