Access the full text.
Sign up today, get DeepDyve free for 14 days.
Nicolas Thegarid, G. Fogassy, Y. Schuurman, C. Mirodatos, S. Stefanidis, E. Iliopoulou, K. Kalogiannis, A. Lappas (2014)
Second-generation biofuels by co-processing catalytic pyrolysis oil in FCC unitsApplied Catalysis B-environmental, 145
(2015)
Production of Transportation Fuels by Co-processing
Andrea Pinho, M. Almeida, F. Mendes, V. Ximenes (2014)
Production of lignocellulosic gasoline using fast pyrolysis of biomass and a conventional refining schemePure and Applied Chemistry, 86
G. Fogassy, Nicolas Thegarid, Y. Schuurman, C. Mirodatos (2012)
The fate of bio-carbon in FCC co-processing productsGreen Chemistry, 14
J. Fermoso, P. Pizarro, J. Coronado, D. Serrano (2017)
Advanced biofuels production by upgrading of pyrolysis bio‐oilWiley Interdisciplinary Reviews: Energy and Environment, 6
Chrysoula Michailof, Themistoklis Sfetsas, S. Stefanidis, K. Kalogiannis, G. Theodoridis, A. Lappas (2014)
Quantitative and qualitative analysis of hemicellulose, cellulose and lignin bio-oils by comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry.Journal of chromatography. A, 1369
A. Pinho, M. Almeida, F. Mendes, L. Casavechia, Michael Talmadge, C. Kinchin, H. Chum (2017)
Fast pyrolysis oil from pinewood chips co-processing with vacuum gas oil in an FCC unit for second generation fuel productionFuel, 188
(2017)
Periodic Report Summary 1—FASTCARD (FAST industrialisation by CAtalysts Research and Development)
Periodic Report Summary 2 — FASTCARD ( FAST industrialisation by CAtalysts Research and Development )
Chenxi Wang, Mingrui Li, Yunming Fang (2016)
Coprocessing of Catalytic-Pyrolysis-Derived Bio-Oil with VGO in a Pilot-Scale FCC RiserIndustrial & Engineering Chemistry Research, 55
J. Piskorz, Donald Scott, D. Radlein (1987)
The composition of oils obtained by the fast pyrolysis of different woods
I. Graça, A. Fernandes, J. Lopes, M. Ribeiro, S. Laforge, P. Magnoux, F. Ribeiro (2011)
Bio-oils and FCC feedstocks co-processing: Impact of phenolic molecules on FCC hydrocarbons transformation over MFIFuel, 90
J. Adjaye, N. Bakhshi (1995)
Production of hydrocarbons by catalytic upgrading of a fast pyrolysis bio-oil. Part II: Comparative catalyst performance and reaction pathwaysFuel Processing Technology, 45
(2015)
Optimizing co-processing of bio-oil in refinery unit operations using a Davison circulating riser (DCR). PNNL
K. Bryden (2014)
Flexible Pilot Plant Technology for Evaluation of Unconventional Feedstocks and Processes
Melisa Bertero, U. Sedran (2015)
Coprocessing of Bio-oil in Fluid Catalytic Cracking
(2010)
Production of stable biomass pyrolysis oils using fractional catalytic pyrolysis
D. Elliott (2015)
Biofuel from fast pyrolysis and catalytic hydrodeoxygenationCurrent opinion in chemical engineering, 9
Michael Talmadge, R. Baldwin, Mary Biddy, R. McCormick, G. Beckham, G. Ferguson, S. Czernik, K. Magrini-Bair, T. Foust, P. Metelski, Casey Hetrick, M. Nimlos (2014)
A perspective on oxygenated species in the refinery integration of pyrolysis oilGreen Chemistry, 16
A. Bridgwater (2012)
Review of fast pyrolysis of biomass and product upgradingBiomass & Bioenergy, 38
A. Pinho, M. Almeida, F. Mendes, V. Ximenes, L. Casavechia (2015)
Co-processing raw bio-oil and gasoil in an FCC UnitFuel Processing Technology, 131
Ineîs Grac̀a, J. Lopes, H. Cerqueira, M. Ribeiro (2013)
Bio-oils Upgrading for Second Generation BiofuelsIndustrial & Engineering Chemistry Research, 52
C. Lindfors, Ville Paasikallio, E. Kuoppala, M. Reinikainen, A. Oasmaa, Y. Solantausta (2015)
Co-processing of Dry Bio-oil, Catalytic Pyrolysis Oil, and Hydrotreated Bio-oil in a Micro Activity Test UnitEnergy & Fuels, 29
D. Naik, Vimal Kumar, B. Prasad, B. Behera, N. Atheya, K. Singh, D. Adhikari, M. Garg (2014)
Catalytic cracking of pyrolysis oil oxygenates (aliphatic and aromatic) with vacuum gas oil and their characterizationChemical Engineering Research & Design, 92
R. Venderbosch, A. Ardiyanti, J. Wildschut, A. Oasmaa, H. Heeres (2010)
Stabilization of biomass‐derived pyrolysis oilsJournal of Chemical Technology & Biotechnology, 85
A. Lappas, S. Bezergianni, I. Vasalos (2009)
Production of biofuels via co-processing in conventional refining processesCatalysis Today, 145
Thuan Huynh, U. Armbruster, H. Atia, U. Bentrup, B. Phan, R. Eckelt, L. Nguyen, D. Nguyen, Andreas Martin (2016)
Upgrading of bio-oil and subsequent co-processing under FCC conditions for fuel productionReaction Chemistry and Engineering, 1
Ramesh Sharma, N. Bakhshi (1993)
Catalytic upgrading of pyrolysis oilEnergy & Fuels, 7
I. Graça, A. Carmo, J. Lopes, M. Ribeiro (2015)
Improving HZSM-5 resistance to phenolic compounds for the bio-oils/FCC feedstocks co-processingFuel, 140
Laurent Gueudré, Florian Chapon, C. Mirodatos, Y. Schuurman, R. Venderbosch, E. Jordan, S. Wellach, Ruben Gutierrez (2017)
Optimizing the bio-gasoline quantity and quality in fluid catalytic cracking co-refiningFuel, 192
I. Graça, I. Graça, J. Comparot, S. Laforge, P. Magnoux, J. Lopes, M. Ribeiro, F. Ribeiro (2009)
Effect of phenol addition on the performances of H–Y zeolite during methylcyclohexane transformationApplied Catalysis A-general, 353
Melisa Bertero, G. Puente, U. Sedran (2012)
Fuels from bio-oils: Bio-oil production from different residual sources, characterization and thermal conditioningFuel, 95
Melisa Bertero, G. Puente, U. Sedran (2011)
Effect of Pyrolysis Temperature and Thermal Conditioning on the Coke-Forming Potential of Bio-oilsEnergy & Fuels, 25
S. Vitolo, M. Seggiani, P. Frediani, G. Ambrosini, L. Politi (1999)
Catalytic upgrading of pyrolytic oils to fuel over different zeolitesFuel, 78
(2014)
Production of Renewable Fuels from Biomass by FCC Co-processing
F. Mercader, M. Groeneveld, S. Kersten, N.W.J. Way, C. Schaverien, J. Hogendoorn (2010)
Production of advanced biofuels: Co-processing of upgraded pyrolysis oil in standard refinery unitsApplied Catalysis B-environmental, 96
M. Domine, A. Veen, Y. Schuurman, C. Mirodatos (2008)
Coprocessing of oxygenated biomass compounds and hydrocarbons for the production of sustainable fuel.ChemSusChem, 1 3
J. Lehto, A. Oasmaa, Y. Solantausta, M. Kytö, D. Chiaramonti (2014)
Review of fuel oil quality and combustion of fast pyrolysis bio-oils from lignocellulosic biomassApplied Energy, 116
Mustafa Al-Sabawi, Jinwen Chen, S. Ng (2012)
Fluid Catalytic Cracking of Biomass-Derived Oils and Their Blends with Petroleum Feedstocks: A ReviewEnergy & Fuels, 26
I. Graça, J. Comparot, S. Laforge, P. Magnoux, J. Lopes, M. Ribeiro, F. Ribeiro (2009)
Influence of Phenol Addition on the H-ZSM-5 Zeolite Catalytic Properties during Methylcyclohexane TransformationEnergy & Fuels, 23
A. Corma, G. Huber, L. Sauvanaud, P. O'connor (2007)
Processing biomass-derived oxygenates in the oil refinery: Catalytic cracking (FCC) reaction pathways and role of catalystJournal of Catalysis, 247
J. Diebold, S. Czernik (1997)
Additives To Lower and Stabilize the Viscosity of Pyrolysis Oils during StorageEnergy & Fuels, 11
I. Graça, A. Fernandes, J. Lopes, M. Ribeiro, S. Laforge, P. Magnoux, F. Ribeiro (2010)
Effect of phenol adsorption on HY zeolite for n-heptane cracking: Comparison with methylcyclohexaneApplied Catalysis A-general, 385
G. Fogassy, Nicolas Thegarid, G. Toussaint, A. Veen, Y. Schuurman, C. Mirodatos (2010)
Biomass derived feedstock co-processing with vacuum gas oil for second-generation fuel production in FCC unitsApplied Catalysis B-environmental, 96
J. Adjaye, S. Katikaneni, N. Bakhshi (1996)
Catalytic conversion of a biofuel to hydrocarbons: effect of mixtures of HZSM-5 and silica-alumina catalysts on product distributionFuel Processing Technology, 48
(2016)
Analysis for co-processing fast pyrolysis oil with VGO in FCC units for second generation fuel production
I. Graça, J. Lopes, M. Ribeiro, F. Ribeiro, H. Cerqueira, M. Almeida (2011)
Catalytic cracking in the presence of guaiacolApplied Catalysis B-environmental, 101
G. Huber, A. Corma (2007)
Synergies between bio- and oil refineries for the production of fuels from biomass.Angewandte Chemie, 46 38
M. Samolada, W. Baldauf, I. Vasalos (1998)
Production of a bio-gasoline by upgrading biomass flash pyrolysis liquids via hydrogen processing and catalytic crackingFuel, 77
(2015)
Co-processing of fast pyrolysis oil in FCC for transportation fuels
A. Lappas, K. Kalogiannis, E. Iliopoulou, K. Triantafyllidis, S. Stefanidis (2012)
Catalytic pyrolysis of biomass for transportation fuelsWiley Interdisciplinary Reviews: Energy and Environment, 1
G. Fogassy, Nicolas Thegarid, Y. Schuurman, C. Mirodatos (2011)
From biomass to bio-gasoline by FCC co-processing: effect of feed composition and catalyst structure on product qualityEnergy and Environmental Science, 4
A. Bridgwater, D. Meier, D. Radlein (1999)
An overview of fast pyrolysis of biomassOrganic Geochemistry, 30
(2017)
Technip signs agreement with BTG Bioliquids to design and build pyrolysis plants for biomass-to-oil production
F. Agblevor, Ofei Mante, R. Mcclung, S. Oyama (2012)
Co-processing of standard gas oil and biocrude oil to hydrocarbon fuels.Biomass & Bioenergy, 45
F. Mercader, M. Groeneveld, S. Kersten, C. Geantet, G. Toussaint, N.W.J. Way, C. Schaverien, Kees Hogendoorn (2011)
Hydrodeoxygenation of pyrolysis oil fractions: process understanding and quality assessment through co-processing in refinery unitsEnergy and Environmental Science, 4
Á. Ibarra, E. Rodríguez, U. Sedran, J. Arandes, J. Bilbao (2016)
Synergy in the Cracking of a Blend of Bio-oil and Vacuum Gasoil under Fluid Catalytic Cracking ConditionsIndustrial & Engineering Chemistry Research, 55
I. Graça, F. Ribeiro, H. Cerqueira, Y. Lam, M. Almeida (2009)
Catalytic cracking of mixtures of model bio-oil compounds and gasoilApplied Catalysis B-environmental, 90
Pyrolysis oil from lignocellulosic biomass (bio‐oil) is a promising renewable energy carrier that can be utilized for the production of second‐generation drop‐in biofuels. Co‐processing bio‐oil with petroleum feeds in existing refinery processes, such as fluid catalytic cracking (FCC), has been proposed as a cost‐effective way of transitioning to the production of such biofuels without the need for significant capital‐intensive investments. Several routes are available for the production of bio‐oil, such as fast pyrolysis of biomass (raw bio‐oil), catalytic fast pyrolysis of biomass (catalytic pyrolysis oil, CPO), and fast pyrolysis of biomass followed by hydrogenation of the produced bio‐oil (hydrodeoxygenated oil, HDO). Research has shown that co‐processing raw bio‐oil is challenging but it can be carried out after adoption of appropriate reactor modifications in the commercial scale. A significant body of work has also focused on the co‐processing of HDO and CPO, and has demonstrated that these types of bio‐oil can be co‐processed with less operational issues. Co‐processing bio‐oil results in a liquid hydrocarbon product that contains only a small amount of oxygenates from bio‐oil. A noticeable increase in coke formation is also observed when bio‐oil is introduced in the FCC feed. However, this increase is lower than what would be expected from the conversion of the pure bio‐oil fraction. This has been attributed to the presence of the petroleum feed, which has a beneficial synergistic effect on the cracking of bio‐oil due to hydrogen donation reactions that inhibit coke formation and promote the conversion of the oxygenates to liquid hydrocarbons.
Wiley Interdisciplinary Reviews: Energy and Environment – Wiley
Published: Jan 1, 2018
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.