Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

DMSO‐Free Solvent Strategy for Stable and Efficient Methylammonium‐Free Sn–Pb Alloyed Perovskite Solar Cells

DMSO‐Free Solvent Strategy for Stable and Efficient Methylammonium‐Free Sn–Pb Alloyed Perovskite... Harmful Sn(IV) vacancies and uncontrolled fast crystallization commonly occur in tin–lead alloyed perovskite films. The typical dimethyl sulfoxide (DMSO) processing solvent is suggested to be the primary source of problems. Here, a DMSO‐free solvent strategy is demonstrated to obtain high‐performance Cs0.25FA0.75Pb0.5Sn0.5I3 solar cells. A rational solvent selection process via Hansen solubility parameters and Gutmann's donor number shows that N,N′‐dimethylpropyleneurea (DMPU) has a strong coordinate ability to form complete complexation with organic (formamidinium iodide) and inorganic (CsI, PbI2, and SnI2) components. This treatment suppresses the iodoplumbate (PbIn2‐n) or iodostannate (SnIn2‐n) preformed in precursor solution, thereby promoting pure intermediate complexes and retarding crystallization, realizing enlarged grain size, and improved film crystallinity. Additionally, it is demonstrated that DMPU‐based solvent system can further inhibit the oxidation of Sn(II) and reduced Sn(IV) content by nearly 75% due to its superior thermal and chemical stability. This DMSO‐free strategy generates a record efficiency of 22.41%, with a Voc of 0.88 V and a FF of 82.72% for the MA‐free Sn–Pb alloyed device. The unencapsulated devices display much‐improved humidity stability at 30 ± 5% relative humidity in air for 240 h, impressive thermal stability at 85 °C for 500 h, and promote continuous operation stability at maximum power point for 150 h. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Advanced Energy Materials Wiley

DMSO‐Free Solvent Strategy for Stable and Efficient Methylammonium‐Free Sn–Pb Alloyed Perovskite Solar Cells

Download PDF
11 pages

Loading next page...
 
/lp/wiley/dmso-free-solvent-strategy-for-stable-and-efficient-methylammonium-5A8fMb7jgi

References (78)

Publisher
Wiley
Copyright
© 2023 Wiley‐VCH GmbH
ISSN
1614-6832
eISSN
1614-6840
DOI
10.1002/aenm.202300181
Publisher site
See Article on Publisher Site

Abstract

Harmful Sn(IV) vacancies and uncontrolled fast crystallization commonly occur in tin–lead alloyed perovskite films. The typical dimethyl sulfoxide (DMSO) processing solvent is suggested to be the primary source of problems. Here, a DMSO‐free solvent strategy is demonstrated to obtain high‐performance Cs0.25FA0.75Pb0.5Sn0.5I3 solar cells. A rational solvent selection process via Hansen solubility parameters and Gutmann's donor number shows that N,N′‐dimethylpropyleneurea (DMPU) has a strong coordinate ability to form complete complexation with organic (formamidinium iodide) and inorganic (CsI, PbI2, and SnI2) components. This treatment suppresses the iodoplumbate (PbIn2‐n) or iodostannate (SnIn2‐n) preformed in precursor solution, thereby promoting pure intermediate complexes and retarding crystallization, realizing enlarged grain size, and improved film crystallinity. Additionally, it is demonstrated that DMPU‐based solvent system can further inhibit the oxidation of Sn(II) and reduced Sn(IV) content by nearly 75% due to its superior thermal and chemical stability. This DMSO‐free strategy generates a record efficiency of 22.41%, with a Voc of 0.88 V and a FF of 82.72% for the MA‐free Sn–Pb alloyed device. The unencapsulated devices display much‐improved humidity stability at 30 ± 5% relative humidity in air for 240 h, impressive thermal stability at 85 °C for 500 h, and promote continuous operation stability at maximum power point for 150 h.

Journal

Advanced Energy Materials – Wiley

Published: May 1, 2023

Keywords: DMSO; intermediate phase; light stability; MA‐free tin‐lead alloyed perovskites; tin oxidation; thermal stability

There are no references for this article.