Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

H∞ switching fuzzy control of solar power generation systems with asymmetric input constraint

H∞ switching fuzzy control of solar power generation systems with asymmetric input constraint This paper aims at presenting a maximum power point tracking (MPPT) controller for photovoltaic (PV) systems subject to asymmetric input constraint. Indeed, the output voltage of the DC‐DC converter used for adjusting the photovoltaic output power can be controlled by means of variation of duty ratio limited between 1 and 0. The control design goal is to improve the efficiency of PV systems under asymmetric saturation of duty ratio. To achieve this goal, first, a Takagi‐Sugeno (T‐S) fuzzy model is used to represent the nonlinear behavior of the PV system. A T–S reference model is employed to give the ideal state direction which must be followed. To achieve a good steady state tracking, the integral of the state tracking error is used to define an extended system state vector. Second, the input characteristic is partitioned into several regions. In each region, the asymmetric saturation function can be considered as a symmetric saturation function. Furthermore, H∞ stabilization conditions for the resulting switching fuzzy control of the PV system under actuator saturation are formulated in term of linear matrix inequalities (LMI) using the Lyapunov approach. Simulation results are exhibited to demonstrate the effectiveness of the proposed design method. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Asian Journal of Control Wiley

H∞ switching fuzzy control of solar power generation systems with asymmetric input constraint

Loading next page...
 
/lp/wiley/h-switching-fuzzy-control-of-solar-power-generation-systems-with-0uusAHS5jo

References (38)

Publisher
Wiley
Copyright
© 2019 Chinese Automatic Control Society and John Wiley & Sons Australia, Ltd
ISSN
1561-8625
eISSN
1934-6093
DOI
10.1002/asjc.2189
Publisher site
See Article on Publisher Site

Abstract

This paper aims at presenting a maximum power point tracking (MPPT) controller for photovoltaic (PV) systems subject to asymmetric input constraint. Indeed, the output voltage of the DC‐DC converter used for adjusting the photovoltaic output power can be controlled by means of variation of duty ratio limited between 1 and 0. The control design goal is to improve the efficiency of PV systems under asymmetric saturation of duty ratio. To achieve this goal, first, a Takagi‐Sugeno (T‐S) fuzzy model is used to represent the nonlinear behavior of the PV system. A T–S reference model is employed to give the ideal state direction which must be followed. To achieve a good steady state tracking, the integral of the state tracking error is used to define an extended system state vector. Second, the input characteristic is partitioned into several regions. In each region, the asymmetric saturation function can be considered as a symmetric saturation function. Furthermore, H∞ stabilization conditions for the resulting switching fuzzy control of the PV system under actuator saturation are formulated in term of linear matrix inequalities (LMI) using the Lyapunov approach. Simulation results are exhibited to demonstrate the effectiveness of the proposed design method.

Journal

Asian Journal of ControlWiley

Published: Jul 1, 2019

Keywords: ; ; ; ;

There are no references for this article.